|
TAIL ROTOR SYSTEMS
Make
your tail rotor system trouble free with
this belt conversion kit from ASI. No longer
will you have to worry
about a wire or tube drive. This belt drive
system is reliable beyond expectation.
The belt drive is quiet and virtually
trouble
free. Now, go to the field with confidence
knowing that you have the finest belt drive
system in the industry .
The housing, and all operable parts are made
with the finest 6061 aircraft aluminum,
replacing the plastic parts
on competitive models. The ASI belt
drive system has half the moving parts of
the conventional wire or tube drive system.
ASI Belt Drive Conversion (A574): $208.65
CNC Tail blade holder (A554): $17.52
CNC Tail blade holder (A554): $17.52
Tail rotor hub 5 mm Black (A547): $ 84.95
Tail rotor hub 5 mm Black (A547): $ 84.95
ASI pitch
slider Set (A575):
$42.75
CNC Tail gearbox bearing holder (A508):$17.92
Carbon
tail rod guide 25mm Ø (A526): $5.18
CNC Tail fin and boom strut holder (A534):
$16.59
Tail boom holder with integrated gyro blade
(A419): $19.30
ASI Black Tailbox Rear Cover (A506): 12.14
12- tooth belt pulley 8mm
$ 15.95
10- tooth belt pulley 5mm (A132):
$15.95
12- tooth belt pulley 8mm with clamp ring
(A133):
$20.35
CNC Tail boom holder for Jetcopter SX
(A958): $25.00
CNC tail rotor servo holder 25 mm (A850):
$16.95
ASI Belt Drive Conversion Set (A574):
$208.65
Tail Belt
(A501): $42.66
 
Another example
of AirStar manufacturing is the claw connectors for the tail
shaft. In case of a crash, only the shaft needs to be
replaced (Which costs about $5, compared to the $30 Vario
replacement) Loosen the grub screws and simply transfer the
claw connectors to a new shaft.
AirStar
International
13006 E. Vista Park Dr.
Moorpark, CA 93021
Phone:
805-553-9996
Fax:
805-553-9888
E-mail:
airstar@sbcglobal.net |
