Click on thumbnails for larger images$25.00
CNC – CCPM aluminum AirStar side frame
$25.00CNC – CCPM aluminum AirStar side frame
$25.00
CNC Acropat - CCPM Side Frame Aluminium
$60.00
Side frame set (3 parts) for gasser mechanic like Benzin 8300-8301
$25.00CNC – Aluminum frame lower (please choice your color)
$179.95
Original Zimmermann exhaust system for G230 - G260
$15.95
CNC – Bearing Plate upper (please choice your color)
$12.50Main shaft clamp ring 12mm (please choice your color)
10mm & 12mm clamp ring with a 9mm grip surface it is design for heavy lifting and larger models,
CNC Head Button (please choice your color)
CNC head button fits all Airstar conversion or Vario factory rotor heads.
$19.95
CNC Mechanic cross member (please choice your color)CNC Mechanic cross member (please choice your color)
$19.95CNC Mechanic cross member (please choice your color)
$9.95CNC Pitch Arm Chrome Plated
CNC Pitch Arm Purple
\
CNC stabilizer/brace support clamp for 25mm booms (please choice your color)
CNC stabilizer/brace support clamp for 25.4mm booms (please choice your color)
Original Factory Catalog $5.95
Hundreds of original factory catalogs available on special
CNC Carburettor throttle arm Purple
$12.50
MainTooth belt for Benzin
$15.00 $29.00Tail blades carbon
$12.9525mm reinforced tail boom holder with integrated gyro plate
Tail boom mount w. gyro plate 25mm & 25.4mm
Jetcopter SX red canopy
Jetcopter SX tail boom support Strut Set red
Our long experience in flying heavy lifter helicopters and big camera ships has shown to us how important it is to get a strong rear bearing mount.
Permanent maintenance and control checks saved us for sure a couple of helicopters because the plastic bearing seats suffered on permanent mechanical wear.
mp
Ring for Rotor Shaft, 12 mm Ø. # A-54/14
$ 12.50
10mm & 12mm clamp ring with a 9mm grip surface it is design for heavy lifting and larger models,
it is very important to have optimum grip on your main shaft.
Factory Zenoah engine, great power, low vibration, excellent for camera ships and scale models
$ 249.00
$20.00
Airstar Aluminum Blade holder (red)
Airstar Aluminum Blade holder Set red
CNC Aluminum plate grip set includes plate 1 grip, 1 arm, 2 bearings 1 spacer and screw set.
Available in multiple colors
Picture shows AirStar tail rotor case belt system,
which fits on 1 inch/25mm tail booms (please choice your color)
Picture show Airstar Acrobat conversion with rear mounted Zimmermann pipe, little silver box shows dull on off switches plus FMA switch controller .
$11.95
Clm Claw Connector$25.00
Airstar CCPM Side Frame for Benzin - 8300 & 8301 red
$19.95
CNC Mechanic Reinforcement Bracket Aluminum
Mechanic Reinforcement Bracket original Factory part
$15.00Tail Rotor Servo Holder Set for 25mm and 25.4mm Boom
Tail boom brace Set fits to different models p.e.
Benzin-Trainer 8300 - 8300 & Acropat
$9.95
ZENOAH CNC - K&N AIR Filter Mount Purple
$11.95
CNC Receiver Plate Purple )
$11.95
CNC Receiver Plate Purple
$14.95
Suppressed Spark Plug Cap
Dear valued customers.
As Airstar continues to grow in regards to the many advancements and product engineering, you will find the unsurpassed quality of manufacturing to be in the forefront of technology. Airstar has recently begun to extend its line of quality products from the CNC milling to the latest in injection molding. This process is state of the art and delivers the most advanced and strongest plastic parts available on the market today. We have had our first run of injection-molded parts, which include custom fabricated skid supports for every helicopter on the market. Stay tuned, as we will soon offer more injection-molded parts.
Skid Sizes…….12mm, 12.8mm