|
So,
you are ready to step into the exiting world of
turbine helicopter flying. Now the big question
is obviously what to buy. There are a few
different choices when it comes to turbines, but
we honestly believe that we have a product that
is so far ahead of the competition, both in
looks and performance that nothing
comes even close to the JetCopter SX.
Here
is why: |
|
|
|
|
|
= |
The JetCopter SX is the most sold turbine
helicopter on the market. It has been around
since the first helicopter turbines became
commercially available, and the product is
constantly upgraded in order to stay ahead of
the game. |
|
|
|
|
|
|
= |
No
upgrades needed. The JetCopter SX is a
thoroughbred dream machine right out of the box.
Where other suppliers include plastic parts so
save on cost, the JetCopter SX in equipped with
high performance aircraft grade aluminum parts
designed to handle the power and weight of a
turbine and at the same time, offer a
lightweight, super strong combination. |
|
|
|
|
|
|
= |
Our fuel tanks are aluminum also. Plastic tanks
should simply not be used on turbines. In case
of a hard landing, plastic or Kevlar tanks will
most likely burst and spray raw fuel into the
turbine, resulting in a complete loss of your
investment. The aluminum tanks we have seen in
crashes so far have all been able to withstand
the impact without bursting. |
|
|
|
|
|
|
= |
Another no-no in turbines is plastic landing
gear. While this is OK for glow and gasoline
helicopters, your investment is simply too much
at risk with a standard landing gear. Our welded
aluminum gear is designed to protect the turbine
in case of a hard landing. It does not shatter
like plastic does. In our initial auto rotation
tests we used plastic landing gear, and they
would always snap in hard landings. It those
cases, the turbine casing was damaged also,
resulting in really expensive turbine repairs. |
|
|
|
|
|
|
= |
We
only use JetCat turbines. JetCat is the most
sold, most reliable turbine on the market, and
their customer support is second to none. In the
US, about 80% of all fixed wing turbine pilots
fly JetCat, and there is a reason for that. When
you fly a $15.000 airplane, you only want to
trust your equipment with the best. We are happy
to be in close partnership with JetCat USA, and
work together to develop cutting edge, reliable
and safe technology. |
|
|
|
|
|
|
= |
Custom built helicopters at no additional cost.
Take a look at our gallery. We can powder coat
or anodize your JetCopter in pretty much any
color you'd like. Do you have a canopy design in
mind. Our paint artist can create it at a very
reasonable cost. Match you canopy with custom
painted aluminum parts and your helicopter is a
real show stopper. |
|
|
|
|
|
|
= |
JetCat
turbines have the fastest turnaround time for
repairs and service. The turbines are serviced
here in the US, in order to make sure you get
the maximum enjoyment from your investment. |
|
| |
|
|
|
= |
You would think that owning the best turbine
helicopter on the market would be expensive...
But, the JetCopter SX is the best deal
available. The JetCopter SX sells for $ 3000
less than our competitors product. We are able
to do this because of the quantity we sell, and
because we produce everything in-house. |
|
| |
|
|
|
= |
AirStar International offers flight training for
new customers, making sure that your transition
to turbines becomes a pleasant experience. We
provide turbine ground school, flight training
and maintenance instruction. |
|
| |
|
|
|
= |
The JetCopter SX can be flown in it's pod and
boom configuration and later installed in a
variety of exiting scale fuselages. Check our
gallery for more inspiration. |
|
| |
|
|
| |
|
|
| |
|
|
